Monday, 2 July 2012

How to Downgrade iPhone 3Gs from iPad Baseband 06.15 to 5.13.04

Just Yesterday, iPhone Dev team released Redsn0w v0.9.14b1 which has capability to Downgrade iPhone 3Gs running iPad baseband 06.15 to an Original iPhone baseband 5.13.04. What are its Advantages? In this post I'll explain and I'll also show you How can you downgrade your iPhone running iPad Baseband.

If you've previously upgraded your device to iPad Baseband 06.15, Just for Unlocking purposes then Now you can switch back to iPhone baseband and enjoy iPhone features which were disabled on iPad baseband.

Advantages of Downgrading

There are two major Advantages of Downgrading your iPhone running iPad baseband to iPhone baseband, And they are

1) With Official iPhone Baseband 5.13.04, You'll be able to use GPS on 3Gs which is not possible with iPad baseband (06.15)

2) Ultrasn0w is Compatible with 5.13.04, that means that you can Unlock your device.

How to Downgrade 3Gs running iPad BB.

To Downgrade, You must make sure that your iPhone is running 06.15 baseband or modem firmware.
Note: If your iPhone 3Gs have 3rd, 4th and 5th digit of serial number is 134 or higher (ie: xxx134...) then DON'T UPGRADE TO IPAD BASEBAND (06.15) or else you'll BRICK your Device. 
To Check go to Settings > General > About and scroll down to check serial number.

Download the Latest Redsn0n

Steps for Downgrading.

Step 1: Download Redsn0w from the above links, Extract Redsn0w using Winrar. Run Redsn0w 

Step 2: Go to Extras tab, Click on Select IPSW and select the IPSW you are running. 

(For example, If I'm running iOS 5.1.1, then Download 5.1.1 IPSW from the link above and select) If you already have IPSW then you don't need to download, just use that IPSW.

Step 3: Now Select your Bootrom. Yes, if you have New Bootrom and No, if you have Old bootrom. 

If you don't know which bootrom you have then Here is a simple way to Check. Go to Settings > General > About, Now scroll down to see your device's Serial number. If 4th and 5th digit of serial number is more than 50 then you have a New bootrom and if it's 44 or less than 44 than you have an Old bootrom. Bootrom's of iPhone's with 4th and 5th digit between 45 to 49 varies. (eg: xx952...., Here it means that the iPhone was manufactured in 200952nd week)
Step 4: Shutdown your device. Press Power button until, Slide to Turn Off appears.

Step 5: Go back to Redsn0w Main screen and Click on Jailbreak Tab.

Step 6: Now Redsn0w will Start doing its Job. When Redsn0w asks you to select some options then.

Select 'Downgrade iPad Baseband' Option and click on Next.

(Also Deselect Install Cydia option if you already have Cydia installed)

Step 7: Follow the Onscreen Instruction to put your device in DFU mode.

Step 8: Now Redsn0w will Start Downgrading Process. Do Not Disconnect

Step 9: After sometime Redsn0w will show a Done message, This does not mean downgrading in finished, The Ramdisk process will continue on your 

Step 10: After Ramdisk gets launched and you see Pwnapple running in your iPhone, You'll be on 'Flashing Baseband' step. It may take upto 10 minutes, Patience is required.


Step 11: Once the Baseband is flashed, Your device will Reboot.


Post a Comment